Fine tuning of the seat tops tonight but first if spiled the aft compartment deck.
Lots of fiddly bits here, lets hope I can keep the markings apart when I cut it...
The tuning of the seat tops was mainly one by planing (which I enjoy) and unfortunately some sanding (which I hate).
You may not see the difference but to me it is huge
I also test fitted the centerboard pin and cut out the pin caps (no picture of those today).
Finally I coated the undersides of the seat tops and the parts of the rudder and board that I could not coat yesterday.
Time today: 2.5h
No comments:
Post a Comment