Paintin,,,

Back to boat building for real, except I had to go and buy some things before I could start. Like rollers, rope for the trailer tarp, new screws for the rudder gear (the once I had was too short) etc.

Finally we got going and did the following:
- installed the rudder gear on the transom
- filled a few holes in the bottom
- glued the lower deck aft
- redrilled and coated the center board pin hole
- coated the underside of the decks
- coated the bottom inside
- sanded the gunwale
- some more filleting inside
- painted gunwale, top plank, rudder stock and tiller

Now some pictures

Time today: 6h