Epoxy coating

Continued with the hull coating. Late last night (or actually early this morning) I trimmed the edges of the glass.

Edges trimmed

Washed of the amine bush and gave the bottom and garboard a light sanding, before the next epoxy coat.

Unfortunately I found some bubbles where the glass goes over the center board case edge. I cut them out, sanded and laid down a strip of glass along all the case edges.

One of the bubbles, before the repair

Then it was time for the second coat (first for the side planks), and when this had set the third coat.

After the second coat, through the garage door

Tim today: 4h