Trimmed the ends of the second plank.
Then it was time to fix the bad butt joint. Scraping, sanding, planing, glue and a piece of wood will make it all fine again.
After the glue has set I will need to scrape, sand and plane again
Then it was time to get going on the seat fronts. Making a template, cut out the piece, dry fit, plane, cut the ventilation holes, glue and relax.....
Fidding the shape of the seat fronts
More fidding. Front and aft piece done and dry fitted.
All pieces cut out and dry fitted
Port side glued up
Time today: 4.5h